Coating Finishes

Penetrating finishes such as oils and waxes penetrate the surface of the timber and are absorbed into the wood fibers. These finishes have a mat or satin appearance. They require more maintenance than other finishes and are less resistant to wear. They can look more ‘dirty’ than other finishes if not cleaned regularly. They are free from edge bonding and enhance the natural beauty of timber.

Surface finishes form a protective shield on top of the timber by means of evaporation leaving a layer of polyurethane. These finishes are divided into three groups;

Solvent based polyurethane finishes are the most economical. They provide a hard wearing finish and require minimal maintenance. They are, however, toxic and fill the house with toxic vapors during application and curing. They are prone to edge bonding, darken through UV exposure and have long drying times. They are available in satin, semi-gloss and high gloss finishes.

Water based polyurethane finishes are a little more expensive than solvent based but offer many benefits. The too are hard wearing and require minimal maintenance. They are also UV stable, minimise edge bonding and maintain the natural colour of the timber. They are non-toxic and fast drying. Less shiny than solvent based polyurethane finishes, they are available in mat, satin or gloss. We rely upon Bona products, the world leader in these coatings.

Oil modified polyurethane finishes are a composition of penetrating oil and surface finish. They are more durable than pure oil finishes but less durable than pure polyurethane finishes. They require more maintenance than pure polyurethane finishes but provide a natural look to the timber. They darken through UV exposure and are available in a satin or semi-gloss finish.

Tung Oils, like oil modified products, provide a natural look on the floor, however they are high maintenance and lack durability

Edge bonding is the term used to describe the bonding effect of boards caused by solvent based polyurethane finishes. The finish acts as a glue between boards bonding them together. When boards contract naturally, this bonding effect can cause irregular gapping or splitting of boards.

Master Floors (Aust) recommends that only high quality coatings, with a proven track record, are used.  Some coatings that Master Floors (Aust) has tested in the past has not endured the test of time.

Most customers believe that the more layers of coating they have on the floor the better and longer lasting that floor will be. This belief is a myth; on a new floor only the correct quantity of coating should be used.  Many new floors will take months or even years to settle in; the older it gets the better it is. A three coat application is the best way to finish off a new floor.

 

Caring For Your Timber Floor
Sanding & Coating Facts

Related Flooring Facts

13 February 2014
Timber Flooring Facts
The aim of sanding is to close the grain of the timber in order to provide a smooth surface for the desired coating to be applied evenly across the floor. The Certified Contractor working on a new flo...
23185 hits
13 February 2014
Timber Flooring Facts
Timber flooring is produced from trees. There are no two trees the same. Therefore, there are no two lengths of flooring the same. Timber flooring is a random blend of natural colours, grains and text...
16567 hits
13 February 2014
Timber Flooring Facts
Penetrating finishes such as oils and waxes penetrate the surface of the timber and are absorbed into the wood fibers. These finishes have a mat or satin appearance. They require more maintenance than...
23953 hits